Garage Door Opener Wall Controls - Sommer Direct Drive Garage Door Openers, Remotes and Parts - Synoris 550 (1040V000)
Shop By
Shopping Options
Replacement garage door opener wall controls, push buttons and control panels for LiftMaster, Chamberlain, Craftsman, Genie, Linear, Marantec, Sommer, Hormann and more, including wireless and motion-detecting panels and commercial control stations.
LiftMaster and Chamberlain wall controls only work with the matching learn button color. The chart below the products shows which one fits.
Sommer Y3113 Push-Button Wall Control, Surface Mount, with 24.6 ft Cable (Replaces 7015V000)SKU: Y3113$30.03 As low as $27.03Genuine Sommer Y3113 push-button wall control: a simple…
LiftMaster, Chamberlain or Craftsman opener? Compare LiftMaster wall controls by learn button color: open it here.
Find the right wall control
LiftMaster, Chamberlain and Craftsman: match the wall control to the color of the LEARN button on the motor unit. A wall control for the wrong color won't work.
| Opener | Wall controls |
|---|---|
| White learn button (Security+ 3.0, 2025 on) | L955W multi-function, L956W wireless, L957W motion-detecting, L958W smart LCD, 041-0489-000 push button |
| Yellow learn button (Security+ 2.0, 2011 on) | 880LMW smart panel, 881LMW / 886LMW motion-detecting, 882LMW multi-function, 883LMW push button, 885LM wireless; Chamberlain 41A7185-1 |
| Red/orange or purple (1997 to 2014) | 41A5273-1 multi-function (replaces the 78LM; same control without the wire), 889LM myQ control panel (most openers from 1998, not the 2500), 75LM lighted push button (1997 to 2011) |
| Green (1993 to 1997) | The panels above don't work on green learn button openers. Call us with your opener model. |
| Genie | GBWCSL2-BX Series II (replaces GBWC2-BX, GPWC-BX, GWC-2 and GWC-BX), GWWC-P wireless, GUWWC-P universal wireless, 19614R.S push button |
| Other brands | Linear HAE00001, Nice HAE00080, Marantec 89463 and 165917, Sommer 7011V001 and Y3113, Hormann PB3, Wayne Dalton 309961, Allstar 103473 |
| Commercial | 1-button and 3-button control consoles, APBS1, DCWALLCTL |
Wall control not working?
- Blinking light, remotes dead: the opener is in Lock mode. Hold the lock button for 2 seconds.
- New install: press the push bar a few times until the opener runs.
- Check the wires: remove the control, trim the wires to 7/16" and reconnect. Loose strands touching the board stop it working.
- Test the wire: disconnect the wires from the control and touch them together. If the opener runs, replace the wall control. If not, check the wire or the opener's logic board.
Need new wire? See opener wire. Want phone control? See myQ accessories. Questions? Call 877-379-4947.
Frequently Asked Questions
Which wall control works with my LiftMaster or Chamberlain opener?
Check the color of the LEARN button on the motor unit. White (2025 on, Security+ 3.0) takes the L955W, L956W, L957W, L958W or 041-0489-000. Yellow (Security+ 2.0, 2011 on) takes the 880LMW, 881LMW, 882LMW, 883LMW, 885LM, 886LMW or 889LM. Openers with a red/orange or purple button (1997 to 2014) can use the 41A5273-1 multi-function panel, the replacement for the 78LM, or the 889LM myQ control panel (most openers made 1998 or later). Neither works with green learn button openers.
Why is my wall control blinking and the remotes don't work?
On LiftMaster and Chamberlain openers, a constantly flashing wall control LED means the opener is in Lock mode, which blocks the remotes. Press and hold the lock button for 2 seconds (it may be under the push button cover). A single blink as the door moves is normal; it shows the opener passing a travel point.
Why doesn't my garage door wall button work?
On a new install, press the button a few times; Security+ 2.0 controls need to sync with the opener. Then check the wiring: trim the wires to 7/16" and make sure no loose strands touch the circuit board. If touching the two wires together runs the opener, replace the wall control. If it doesn't, check the wire run or the opener's logic board.
Where is the learn button on my garage door opener?
On LiftMaster, Chamberlain and Craftsman openers it's on the motor unit, on the side where the wall control and safety sensor wires connect, next to the antenna wire; you may need to remove the light cover. Many new wall controls, like the L955W, also have a learn button built in. On Genie openers it's the PROGRAM button on the motor unit.
